These clamshell pipe spools were fabricated by U.S. Bellows for a section of the duct for a gas turbine installation. The units were constructed from ASTM A.240 type 321 stainless steel. The flanges had a 32 RMS machined faces for bolting up the flanges without gaskets. The spools were designed to be removed in four sections so that the spool could be removed and the turbine pulled back for maintenance. They are 85.5″ in diameter and 21.5″ in overall length. The units were designed for an operating temperature ranging from -40°F to 950°F.
Upcoming Live Webinar
U.S. Bellows – Expansion Joints In-depth Webinar
Date: Thursday, August 11, 2022
Register for 10:00 am CDT
Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are worth 1 PDH Credit for TX Professional Engineers
Get to know U.S. Bellows from introducing our team and manufacturing capabilities to exploring design details in technical drawings for large-scale projects. View case studies that lead to the creation of new standards and designs. Learn about cost-saving measures for expansion joint failures and how to prevent future problems.
July 28th: Pipe Clamp Design, Application & Installation Webinar 10:00 am OR 2:00 pm
August 4th: Variable Spring Support Design, Size Selection, Installation & Maintenance 10:00 am OR 2:00 pm
August 11th: U.S. Bellows – Expansion Joints In-depth Webinar 10:00 am
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
- Piping system designers that may decide to use expansion joints
- Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
- Designers that use modern software systems to evaluate different options
- Engineers / Managers: field, maintenance, process, operations, construction, surveyors
*This online course is approved for 8 hrs. P.E. CreditsRegister Now