Request A Quote

Engineering, Design and Fabrication of 119″ Expansion Joints, Duct Work and Supports

June 25, 2012

115705b11 (1)

 

U.S. Bellows provided the total engineeringdesign and fabrication package for this project that included: expansion joints, elbows, duct work, saddle supports, F-type variable spring supports, slide plates and pipe anchors.

115705a1

A total of twelve, 119″ dia. double slotted hinged expansion joints, thirty-six, 72″ dia. elbows and twelve, 119″ dia., 55″ long header ducts were fabricated for a power plant in Mississippi. The expansion joint assemblies were designed for .5° angular movement, 3/8″ lateral, 1-1/2″ axial compression. The design conditions were 5 psig at 300°F. The duct work was fabricated from A-36 carbon steel material and the bellows were fabricated from 304 stainless steel. A dye penetrant exam, soap and air test and spot x-ray on all duct seam welds was performed prior to shipping.

Top