This single expansion joint assembly was fabricated with a single-ply 304 stainless steel bellows, and carbon steel pipe, miter bends, and limit rods. It measured 12′-2″ from the center to center of the elbows. These bellows were designed with a low spring rate to meet the allowable forces and movements on the compressor inlet nozzle. All welds were air tested and spot x-rayed to assure quality and performance. This unit was completed in 3 weeks to meet the customer’s construction schedule.
Upcoming Live Webinar
U.S. Bellows – Expansion Joints In-depth Webinar
Date: Thursday, August 11, 2022
Register for 10:00 am CDT
Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are worth 1 PDH Credit for TX Professional Engineers
Get to know U.S. Bellows from introducing our team and manufacturing capabilities to exploring design details in technical drawings for large-scale projects. View case studies that lead to the creation of new standards and designs. Learn about cost-saving measures for expansion joint failures and how to prevent future problems.
July 28th: Pipe Clamp Design, Application & Installation Webinar 10:00 am OR 2:00 pm
August 4th: Variable Spring Support Design, Size Selection, Installation & Maintenance 10:00 am OR 2:00 pm
August 11th: U.S. Bellows – Expansion Joints In-depth Webinar 10:00 am
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
- Piping system designers that may decide to use expansion joints
- Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
- Designers that use modern software systems to evaluate different options
- Engineers / Managers: field, maintenance, process, operations, construction, surveyors
*This online course is approved for 8 hrs. P.E. CreditsRegister Now