Rectangular Metal Bellows with Round Corners

November 26, 2008

These rectangular metal bellows are fabricated entirely from ASTM A-240 type 304 stainless steel. The larger bellows measures 240″ x 80″. The smaller bellows measures 157″ x 65″. The design conditions were 1 PSIG at 1,000°F. Both metal bellows are designed with three convolutions with round corners. The metal bellows welds were 100% dye-penetrant examined and soap and air tested prior to shipment. These bellows are designed to be installed at the ductwork connection to a large steam boiler.

Upcoming Live Webinar

Sign-up for a Live Technical Webinar…

Pipe Support Engineering & Design Webinar

Date: Thursday, December 26, 2024 - Register for 10:00 am OR 2:00 pm

Note: Time Zone is CDT Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers

This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.

Upcoming Webinars:

No upcoming webinars. Please check later.

View video recordings from past webinars…

Online Course

Expansion Joint Application and Design

Our Expansion Joint course was developed for the following disciplines…

Piping system designers that may decide to use expansion joints
Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
Designers that use modern software systems to evaluate different options
Engineers / Managers: field, maintenance, process, operations, construction, surveyors

*This online course is approved for 8 hrs. P.E. Credits