14″ Diameter, Tied Universal Expansion Joints for a Power Plant in Illinois

June 14, 2002

U.S. Bellows, Inc., the expansion joint division of Piping Technology & Products, Inc., designed and fabricated 14″ diameter, tied universal expansion joints for a steam application at a power plant in Illinois. The expansion joints were designed at 350 psig, 780° F and constructed from Inconel® 625 bellows, A105 300# RFSO flanges, A106 GR. B spool, and SA193 B7 tie rods. The expansion joints were hydro-tested at 525 PSIG

Upcoming Live Webinar

Sign-up for a Live Technical Webinar…

Pipe Support Engineering & Design Webinar

Date: Thursday, December 26, 2024 - Register for 10:00 am OR 2:00 pm

Note: Time Zone is CDT Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers

This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.

Upcoming Webinars:

No upcoming webinars. Please check later.

View video recordings from past webinars…

Online Course

Expansion Joint Application and Design

Our Expansion Joint course was developed for the following disciplines…

Piping system designers that may decide to use expansion joints
Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
Designers that use modern software systems to evaluate different options
Engineers / Managers: field, maintenance, process, operations, construction, surveyors

*This online course is approved for 8 hrs. P.E. Credits